CLOSE
HAVE A QUESTION?
CLOSE
SHARE WITH A FRIEND

Enter your name, and your friends name and email address

CLOSE
PERSONALISE YOUR ITEM
CLOSE
BULK ORDER QUOTE
CLOSE
Stock Notification

DXD-325A 2.5HP Single Speed - LX Alternative

Direct Replacement

LID: 72309
DXD Alternative
Single Speed
2.5HP
2" x 2" (79mm x 79mm)
£224.72 Inc VAT
( £288.10)
PMP-5750
LP250
25 In StockSame day dispatch if ordered by 14:00
Extended Warranty Available
Extended Warranty Available
Add your 1 year warranty in the basket
DXD-325A 2.5HP Single Speed - LX Alternative
£224.72
RRP £288.10

LX LP250 2.5HP 1 Speed is a great alternative to DXD-325A

High Performance and Large Flow

The LX LP series hot tub pumps are one of the most common single speed pumps used on Chinese manufactured hot tubs and swim spas as well as many other newer hot tub and swim spa brands appearing on the European market. 

The LP series of pumps will serve as a booster pump to deliver a high volume of water through hot tub jets. 

If you require a 2 speed pump from LX, please see our LX WP Series.

The LP Series is also ideal for use with

  • Cycling water for fish ponds, including those that require salt water or actual seawater.
  • Weak corrosive liquids such as weak acids (without solid granules)
  • For circulating fluids for use in workshops for cooling.

This is a direct replacement for a LX LP250 Single Speed Spa Pump with 2" connections manufactured AFTER / POST 2008 (See IMPORTANT NOTE below)

The LP series is also the pump of choice for both Jacuzzi and Sundance spas, replacing the discontinued Theramax pumps and can also be used to replace similar higher priced pumps from other manufactures at a more economical price.

IMPORTANT NOTE: Older (Pre 2008) LP & WP pumps and wet ends are manufactured with a shorter section (approx. 15mm) and discharge port (approx. 30mm). You may find on some hot tubs with very rigid plumbing that the newer versions will not line up with the pipework. The wet end faceplate moulding is different and they are also "open" on the rear of the wet end casing as opposed to the pre 08 wet ends which are encased. SEE IMAGES FOR REFERENCE 

If you are replacing a pre '08 version (the wet end is labelled B351-03) we find that the Waterway Executive equivalent tends to have a better fit.

A great alternative to the RWA 2.5HP Single Speed

Model Information
Dimensions L x W x H 385x200x220mm
HEAD - H max 15.5m
FLOW - Q max 600 L/min
Type / Speed 1 Speed
Model LP250
Horsepower 2.5 Hp
MPN LP250
Motor Information
Voltage / Frequency 220-240V / 50Hz
Amp Draw 8.0 A
Power - P1 1.85 kW
RPM 2900
Capacitor Size(s) 40 µF
Cord / Plug Type 3 Core AMP
Wet End Information
Union Connection Ref 2.0 " (Inch)
Configuration Center Suction, Side Discharge
Connection Diameter 79mm
Thread Type Male - Buttress
Impeller Part No. B351-21
Impeller Diameter 112mm
Impeller Vane Gap 11
Shaft Seal Type Type A
Spare Parts Available Yes - See Spare Parts List
Dimensions
Spare Part Diagram
Customer Reviews

Write a review

star
star
star
star
star
Questions & Answers

Submit a question

 
warning
Confirm add to basket
Return to listing
Add to basket
COMPARISON BASKET
COMPARE