CLOSE
HAVE A QUESTION?
CLOSE
SHARE WITH A FRIEND

Enter your name, and your friends name and email address

CLOSE
PERSONALISE YOUR ITEM
CLOSE
BULK ORDER QUOTE
CLOSE
Stock Notification

LX WP500-II Spa Pump - 5HP - 2 Speed

93mm Centre Suction x 93mm Side Discharge

LID: 5093
WP500-II
Two Speed
5HP
2 ½" x 2 ½" (93mm x 93mm)
£406.43 Inc VAT
( £541.91)
PMP-8688
WP500
19 In StockSame day dispatch if ordered by 14:00
Extended Warranty Available
Extended Warranty Available
Add your 1 year warranty in the basket
LX WP500-II Spa Pump - 5HP - 2 Speed
£406.43
RRP £541.91

High Speed for Massage, Low Speed for Filter / Cycle

The LX WP series hot tub pumps are one of the most common two speed pumps used on Chinese manufactured hot tubs and swim spas as well as many other newer hot tub and swim spa brands appearing on the European market. 

The WP series of pumps will often serve as a circulation and booster pump, the low speed will circulate to heat and run filter cycles while the high speed will deliver a higher volume of water through hot tub jets. 

If you require a 1 speed pump from LX this would be the LP pump series (please see our other listings). 

The LP Series is also ideal for use with

  • Weak corrosive liquids such as weak acids (without solid granules) Liquid temperature: +5-60
  • For circulating fluids for use in workshops for cooling.

This is a direct replacement for LX WP500 Two Speed Spa Pump with 2" connections manufactured AFTER / POST 2008 (See IMPORTANT NOTE below)

Commonly used on: 

  • Chinese Spas, 
  • Coasts (not to be confused with the American brand "Coast Spas"), 
  • Known to be used on some Jacuzzi models.

NOTE: This pump has 93mm Centre Suction x 93mm Side Discharge Connections

IMPORTANT NOTE: 2008 LP & WP pumps and wet ends are manufactured with a shorter suction (approx. 15mm) and discharge port (approx. 30mm). You may find on some hot tubs with very rigid plumbing that the newer versions will not line up with pipework. The wet end faceplate moulding is different and they are also "open" on the rear of the wet end casing as opposed to the pre 08 wet ends which are encased. SEE IMAGES FOR REFERENCE.

Model Information
Dimensions L x W x H 460x200x260mm
HEAD - H max 14 / 3 m
FLOW - Q max 1120 / 320 l/min
Model WP
Horsepower 0.05-0.5 Hp
MPN WP500-II
Motor Information
Amp Draw 4.5 / 15.0 A
Power - P1 3.7 / 0.75 kW
RPM 2900 / 1450
Capacitor Size(s) 50 µF
Wet End Information
Shaft Seal Type Type A
Spare Parts Available Yes - See Spare Parts List
Dimensions
Spare Part Diagram
More Info

Pump Specifications

Dimensions

  • 460 x 200 x 260 (mm)

Summary

  • High Speed: 5HP / 3.73kW
  • Low Speed: 1HP / 0.75kW
  • Max. Head: 14 m
  • Max. Flow: 1120 L/min
Customer Reviews

Pump is brilliant our hot tub is quite an old one but this pump is excellent and looks and feels just like a new tub. there where issues with measurements but that was all resolved, excellent customer service and sent the extra parts I needed free of charge as they said it was an error on there side. have ordered more parts from this company highly recommend them

REVIEWED BY: Jenny
star
star
star
star
star

Write a review

star
star
star
star
star
Questions & Answers

Submit a question

 
warning
Confirm add to basket
Return to listing
Add to basket
COMPARISON BASKET
COMPARE