CT1 Power Grab 'n' Bond - 290ml
Revolutionary Construction Adhesive for Verticle Bonding
NEW! CT1 Power Grab 'n' Bond
Revolutionary Construction Adhesive
Power Grab n Bond is a revolutionary product in the field of heavy duty versatile bonding. It's formulation is based on our unique hybrid polymer product CT1. The density of Power Grab n Bond is far greater allowing phenomenal results in initial grab. Coupled with the rapid curing will in the majority of applications reduce labour time by at least 50%.
With Power Grab n Bond there is absolutely no need for any additional fixings as it wFas initially developed for facade bonding. In addition Power Grab n Bond has a capacity to adhere to endless materials such as stone, granite, ytong, marble, concrete, all metals (including alloys), polystyrene and most plastics. Power Grab n Bond's ability to bond combined materials such as wood to concrete or stainless steel to stone is incredible. As already outlined Power Grab n Bond was initially developed for façade applications, conventional methods relied on two component epoxy mix to adhere the marble or granite slab to the block wall. Depending on the weight of the slab each one would then have to be supported by drilling in ties to support each one. As with all epoxies they can be temperamental if the correct mix is not achieved. Also full cure can be between 24 and 72 hours.
Power Grab and Bond has none of these disadvantages.
Suitable for:
- Concrete
- Stone
- Ceramic
- Marble
- Wood
- Gypsum Board
- Metals
- Lead
- Glass
- Mirror
- Plastics (Exluding Polyproplyene)
Power Grab 'n' Bond is resistant to:
U.V, Seawater, Chlorine and most Chemicals.
Temperature Resistant:
-40C/100C. Does not Shrink. Good Resistance to vibration and impact.
Directions for Use: Please see the more infomation tab
Downloads & Articles:
Power Grab n Bond Datasheet: Click Here
Power Grab n Bond Product Information: Click Here
Need help or advice? Can't find the product you need? Unsure which part fits your system? Simply phone or email us for fast friendly advice and we will be pleased to assist you!
Power Grab 'n' Bond Directions for Use:
1. Cust the tube at the nose
2. Apply 450mm bead per kilogram weight on heavy vertical bonding
3. Porous stone should be sealed with PVA adhesive
4. Apply on a clear, de-greased surface
5. Can be applied on damp surfaces, however, in cold conditions this may reduce the intial grab on vertical applications.
